StrongLumio LED strip COB 24V 10+10W/m (576 LED/m), 8mm 2PIN CCT

COB CCT LED strip with highly luminous diodes, in a roll, with densely placed chips, ensuring a continuous line, with the possibility of setting the light from warm to cold white.Light colour warm - cold white (2700 - 6500K), colour rendering index Ra >90, i.e. that the light is very similar to natural daylight!.
LED type - high brightness 922.
Equipped with double-sided 3M adhesive tape
Width: 10mm
Thickness: 2,3mm
Power: 11 + 11W/m (608 diodes per 1m)< br> Luminous flux: 2x 930lm/m
Colour rendering index: Ra > 90
Voltage: 24V DC (direct current)
Packed in rolls of 100 m, can be unpacked in 1 m (can be shortened in marked places every approx. 2,65 cm, in these places it is also possible to connect again). Do not connect the entire coil to the power supply, damage to the LED strip or transformer may occur.
When purchasing shorter LED strips, it will be manipulated to the nearest shorter marked spot for cutting. Tolerance is approx. 1cm per metre of length.
Connecting the cable: by soldering or using quick connectors.
Heat dissipation must be ensured when installed. Laminate, glass, etc. do not provide sufficient heat dissipation, the LED strip could be overheated, its lifetime will be shortened and it may be damaged. We recommend placing the LED strip in the appropriate ALU profiles to ensure heat dissipation.



Sensors, switches.

Remote controls.

LED profiles.